microEnable 5 marathon deepVCL

设备功能

处理器

Xilinx Kintex7 XC7K410T

板载内存

2 GByte DDR3-RAM

I/O模块接口（信号触发和同步）

onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs

通过接口供电（每个端口）

PoCL (4W/12V per cable, Safe Power)

相机接口

标准

Camera Link 2.0

接口

Camera Link

配置

CL-deca (80bit), CL-full, CL-dual base, CL-base, CL-medium

接头

2 x SDR/HDR26 (miniCL)

功率输出

PoCL SafePower, 4W/12V per cable

相机支持

area scan camera, line scan camera

芯片类型

CFA sensor (Bayer), RGB sensor, Grayscale sensor

芯片分辨率

64k*64k (area scan sensor, VisualApplets), 64k (line scan sensor, VisualApplets)

位深

8-16-bit (grayscale), 24-48-bit (color)

数据带宽

6,8 Gbit/s (850 MB/s)

数据带宽（每个端口；总计）

6,8 Gbps; 6,8 Gbps (850 MB/s)

端口数

2

测试环境

Camera Simulator

主机PC接口

PC总线接口

PCIe 2.1 x4, DMA1800

PC总线接口性能

up to 1.800 MB/s (sustainable)

控件和通用I/O

触发板GPIO接口

Box connector (34-pin)

板载GPIO接口

One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)

板载前端GPIO接口

2 TTL outputs, up to 20 MHz frequency, One 15-pin D-Sub socket: 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input

GPIO同步和控制

Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization

GPIO接口概述

Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs, onboard: 8in/8out (max.), TTL or opto-coupled

处理功能

基本功能

Image Selector, LUT, Invert, ROI, Offset/Gain/Gamma correction, Tap Sorting (Sensor Readout Correction)

物理和环境信息

尺寸

PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height

重量（典型值）

165 g

功耗/电源

12 V, 1.4 A (actual values depend on processing)

操作温度

50° (0 LFM*), 60° (100 LFM*) FPGA operating temperature: 0°C to 85°C, *LFM = Linear Feet per Minute, unit for measuring airflow velocity

存储温度

-50°C up to 80°C

相对湿度（操作、存储）

5%-90% non-condensing (operating), 0%-95% (storage)

MTBF

pending

合规

WEEE, RoHS, REACH, CE class B

软件

软件驱动程序

Linux 64-Bit, Windows 11 / 10 (32-Bit), Windows 11 / 10 (64-Bit)

软件工具

microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), microDiagnostics (Analysis and service tool), Device Drivers, SDK, Documentation

软件API

Framegrabber SDK, .net interface

FPGA编程

VisualApplets

BV-软件兼容性

Halcon, others on request