microEnable 5 marathon VCX-QP

设备功能

处理器

Xilinx Kintex7 XC7K160T

板载内存

2 GByte DDR3-RAM

I/O模块接口（信号触发和同步）

onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs

通过接口供电（每个端口）

PoCXP (13W/24V per cable, Safe Power)

相机接口

标准

CoaXPress 1.0/1.1

接口

CXP-6

配置

CXP1-6; up to 4 cameras

接头

4 x DIN 1.0/2.3

功率输出

SafePower, Power over CXP 13W/24V per cable

相机支持

area scan camera, line scan camera

芯片类型

CFA sensor (Bayer), RGB sensor, Grayscale sensor

芯片分辨率

16k (-32k)*65k (area scan sensor, depends on applet), 16k - 32k (line scan sensor, depends on applet)

位深

8-16-bit (grayscale), 24-48-bit (color)

数据带宽

4 x 6,25 Gbit/s

数据带宽（每个端口；总计）

6,25 Gbps; 25 Gbps

端口数

4

测试环境

Camera Simulator

主机PC接口

PC总线接口

PCIe 2.1 x4, DMA1800

PC总线接口性能

up to 1.800 MB/s (sustainable)

控件和通用I/O

触发板GPIO接口

Box connector (34-pin)

板载GPIO接口

One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)

板载前端GPIO接口

2 TTL outputs, up to 20 MHz frequency, One 15-pin D-Sub socket: 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input

GPIO同步和控制

Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization

GPIO接口概述

8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs

处理功能

基本功能

Mirroring, Image Selector, LUT, White Balance, Invert, ROI, Offset/Gain/Gamma correction

物理和环境信息

尺寸

PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height

重量（典型值）

168 g

功耗/电源

typ. 1.175 A @ 12V (actual values depend on image pre-processing), maximum load: 3.35 A (single supply over 4-pin power connector)

操作温度

50° (0 LFM*), 60° (100 LFM*) FPGA operating temperature: 0°C to 85°C LFM = Linear Feet per Minute, unit for measuring airflow velocity

存储温度

-50°C up to 80°C

相对湿度（操作、存储）

5% - 90% non-condensing (operating), 0% - 95% (storage)

MTBF

pending

合规

WEEE, RoHS, REACH, CE class B

软件

软件驱动程序

Linux 64-Bit, Windows 11 / 10 (64-Bit), Windows 11 / 10 (32-Bit)

软件工具

microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), microDiagnostics (Analysis and service tool), Device Drivers, SDK, Documentation

软件API

Framegrabber SDK, .net interface

FPGA编程

VisualApplets

BV-软件兼容性

Halcon, Labview, VisionPro